After getting my Antec Black Fusion, I just couldn’t get it to work in Ubuntu with lirc 0.8.4a, so I went ahead and created some simple packages for lirc 0.8.5pre1 which do appear to work with this case / device.

Notice: Please note in preparing these lirc 0.8.5pre1 packages I’ve dropped a fair few of the Ubuntu specific enhancements to lirc since this is intended as a fix solely for adding support for this device. Debdiffs welcome. 😉

Firstly add my repository key to apt so that the packages authenticate:

$ wget -O - http://packages.kennynet.co.uk/repository.key | sudo apt-key
add -

(note: trailing dash)

Next grab the sources.list entries for my repository so you can download the 0.8.5pre1 packages:

$ sudo wget -O /etc/apt/sources.list.d/kennynet-testing.list
 http://packages.kennynet.co.uk/intrepid-testing.list

Now we’re ready to install the packages as follows:

$ sudo apt-get update
$ sudo apt-get install lirc lirc-modules-source

With these packages installed, you only need the following line in /etc/lircd.conf:-

include "/usr/share/lirc/remotes/imon/lircd.conf.imon-antec-veris"

I’ve also made a custom (somewhat hacky) startup script which’ll launch the required two lircd daemons for the two lirc devices created under /dev.

You can download the script here, just put it in /etc/init.d/: lirc-imon

Now make it executable and set it to run on startup:

$ sudo chmod +x /etc/init.d/lirc-imon
$ sudo update-rc.d -f lirc remove
$ sudo update-rc.d lirc-imon defaults 51

This’ll disable the default lirc init.d script and enable the lirc-imon one that I’ve created.

From then on I’d make sure it’s loaded the new modules / started lirc as follows then test it out using irw:-

$ sudo /etc/init.d/lirc stop
$ sudo modprobe -r lirc_dev lirc_imon
$ sudo /etc/init.d/lirc-imon start
$ irw

Press some buttons, they should now show up.

All works for me, let me know how it goes… there are numerous debug steps at each stage if it doesn’t work but I’ve left these out to try and keep the e-mail relatively short. We can go through those if you still experience problems. Please leave comments if you have any questions.

I’ll package the very latest imonlcd patch for lcdproc and upload that to my testing repositories soon and make another quick post.

Linux antec, imon, lirc, ubuntu